Researchers from Deakin University in Victoria, Australia, have developed a lithium metal battery prototype which features electrolytes designed to be resistant to catching fire.<\/p>\n\n\n\n

The breakthrough from Deakin\u2019s Institute for Frontier Materials (IFM) is said to represent an alternative to the rechargeable lithium-ion batteries use in portable electronics, stationary energy storage and electric vehicles and is the culmination of more than 10 years\u2019 work by electromaterials staff at the institute.<\/p>\n\n\n\n

Patrick Howlett, director of the university\u2019s Battery Technology Research and Innovation Hub (BatTRI-Hub) said a 1 Ah (amp-hour)-sized lithium metal pouch cell was the first device Deakin created using ionic liquid electrolytes which allow for better safety and high temperature and high voltage stability, to offer increased energy storage capacity.<\/p>\n\n\n\n

The ionic liquid is a salt which takes liquid form at room temperature. Researchers at Deakin and Melbourne\u2019s Monash University have been working for 30 years on the materials, which have begun to attract widespread interest in the battery community.<\/p>\n\n\n\n

\u201cIonic liquids are non-volatile and resistant to catching fire, meaning that unlike the electrolytes currently used in lithium-ion cells \u2013 used by, for example, Samsung and Tesla \u2013 they won\u2019t explode,\u201d said Howlett. \u201cNot only that, but they actually perform better when they heat up so there\u2019s no need for expensive and cumbersome cooling systems to stop the batteries from overheating.\u201d<\/p>\n\n\n\n

Changing features<\/strong><\/p>\n\n\n\n

However, it is an outstanding ability to cycle energy-dense lithium metal electrodes which inspired the research effort. IFM research fellow Robert Kerr, who has worked on translating the materials into real devices, said changing battery materials could change key features of the devices.<\/p>\n\n\n\n

\u201cFor example, if we change the electrodes to include lithium metal, we can increase the storage capacity for up to 50% longer run-times,\u201d said Kerr. \u201cWhen we change the electrolyte, it can give a higher discharge rate or allow the battery to operate at much higher temperatures \u2013 but the electrolyte must be compatible when in contact with the reactive lithium metal electrode. By choosing the right electrolyte chemistry we can completely avoid the catastrophic explosions caused by ignition of the volatile electrolyte when the cell is damaged or overcharged.\u201d<\/p>\n\n\n\n

While lithium metal batteries could offer far better energy density and much lower weight than lithium-ion technology \u2013 thanks to the replacement of heavier graphite with lithium metal as anode \u2013 lithium metals do not work well with conventional electrolytes. Another headwind for the innovative technology is the lack of knowledge about the best way to manufacture cells at practical levels for demonstration, given the use of lithium metal electrodes in lithium metal batteries is not common in the industry. The breakthrough has been described as \u201cjust a stepping stone on the way to 1.7 Ah cells, which are soon to be in production\u201d nevertheless.<\/p>\n\n\n\n

The project has been progressing at a rapid pace since the formation of the Deakin BatTRI-Hub in 2016. The potential of ionic liquid electrolytes is also being explored under a separate three-year project run by IFM and BatTRI-Hub with chemical manufacturer Boron Molecular \u2013 which was spun out of the federal Commonwealth Scientific and Industrial Research Organisation \u2013 and technology company Calix.<\/p>\n\n\n\n

The project,\u00a0which received\u00a0AU$3 million (US$1.9 million) from the Australian government\u2019s Cooperative Research Center Projects program last year,\u00a0aims\u00a0to develop high performance, low-cost, fast charge and discharge lithium-ion hybrid batteries based on nano-active electrode materials and ionic liquid electrolytes. It will explore the use of CalixFlash Calcination technology to produce customized micron-sized nano-electroactive materials for intercalation-based anodes and cathodes.\u00a0That would be integrated with optimized ionic electrolytes developed with Boron Molecular and Deakin, to make up to 10 kWh battery pack prototypes at Deakin, through the Bat-TRI-Hub.<\/p>\n\n\n\n

In the first stage of the project, coin-cell fabrication, electrochemical screening and testing of Calix\u2019s highly porous nano-active electrode materials\u00a0\u2013\u00a0such as manganese oxide (Mn3O4) cathodes and titanium oxide (TiO2) anodes\u00a0\u2013\u00a0and ionic liquid electrolytes will be carried out by IFM at Deakin. After that, the BatTRI-Hub will manufacture pouch cell and battery pack prototypes. The project will involve a field trial of the battery packs, including solar applications linked to small solar systems and\u00a0Deakin\u2019s smart microgrid, which features a 7 MW solar farm and a 1 MW battery. The products could then be supplied to global manufacturers and customers for performance evaluation.<\/p>\n\n\n\n

From: https:\/\/www.pv-magazine.com\/2020\/04\/15\/a-non-flammable-lithium-metal-battery\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Researchers from Deakin University in Australia claim their battery chemistry is based on a new class of electrolyte material which carries no risk of uncontrolled thermal events and represents a viable alternative to rechargeable lithium-ion batteries. Researchers from Deakin University in Victoria, Australia, have developed a lithium metal battery prototype which features electrolytes designed to…
Read more<\/a><\/p>\n","protected":false},"author":5,"featured_media":819,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"nf_dc_page":"","footnotes":""},"categories":[3],"tags":[],"class_list":["post-818","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-solarnews"],"yoast_head":"\n